Retractable Banner Stands

A retractable stand stores its graphic on a spring-loaded roller inside the base, so setup is a single pull and the graphic is protected in transit. A telescopic stand uses an adjustable pole frame that the banner attaches to, which accommodates a wider range of banner sizes and is often the better choice if you need to swap graphics of different dimensions on the same hardware.

Under two minutes, by one person, without tools. That is the main reason retractable stands remain the most common portable display — they are the lowest-effort way to put a branded graphic in a space.

The most common widths are 33 inches and 36 inches, at roughly 79 to 90 inches tall. Widths from 24 to 60 inches are available across our range. Every product on this page lists its exact graphic size and live area — design to the live area, since the top and bottom are partially concealed by the hardware.

Yes, and you should. Replacement graphics are far cheaper than replacing the whole unit, and quality banner stand hardware lasts for years. Bring us the stand or its model number and we will print and fit a new banner to it.

A print-ready PDF in CMYK, built at final size, with 0.5 inch bleed on all sides and critical text kept at least two inches inside the visible edge. For large-format work at normal viewing distance, 150 DPI at final size is the practical target. Send vector artwork for logos and type wherever possible.

A standard retractable banner stand runs about $175 to $400, a premium system $400 to $800, and tabletop stands under $150. Printed graphics add roughly $100 to $250, so a complete banner stand out of the box is usually a few hundred dollars — and how much is a custom banner depends mostly on the artwork, not the hardware: a one-color logo layout costs less than a full-bleed photo. If you are searching retractable banner stands near me, we are a local Chicago banner stand shop at 546 York Road, Bensenville with same-day pickup and same-week delivery, and the live retractable banner stands price table is on this page.

Yes — every stand in this line sells stand only, no banner, which is the right move if you have your own printing, want blank hardware, or are replacing an old unit. Need new graphics for hardware you already own? We print the replacement banner for retractable stand frames matched to your exact roller and hook spec — and if your project is replacing banner in retractable banner stands, bring the stand or the model number and we will match the fit. Broken pole or roller? We stock replacement poles, rollers, and bases for the major systems.

The roll up banner standard size is 33 by 79 inches (the classic 3x8) or 36 by 80 inches (4x8), with 24, 30, 40, and 60 inch widths also available. A 2x6 retractable banner stand — 24 by 72 inches — is the compact option for tight booths, doorways, and trade counter setups, and tabletop stands go smaller still. Every listing above states its exact graphic size and live area, so design to the live area, since the top and bottom are partially concealed by the hardware.

Yes to both. For outdoor and inclement-weather work, our Outdoor Xtreme, Thundur, and Monsoon units are the right outdoor retractable banner stands for sidewalks, job sites, and festival booths — built for wind and rain, not just a heavier base. And when you need quantity — booth fleets, store chains, event series — we quote retractable banner stands wholesale: volume pricing, matching graphics across units, and staggered delivery dates when you need them.